Anti-Crack HD & HP recommended for ArcusPlaster and ArcusStonecoat.
View Product Information View Technical Study
WHERE TO BUY THE ANTI-CRAK™ FIBERS:
Spray Tech, Lincoln, Nebraska Contact: (402) 466-1645
ArcusStonecoat:
The minimum quantity order for the ¼” (6mm) is (1) 33 lb box, at $94.05, plus UPS shipping costs and sales tax if applicable. You can pay by credit card over the phone and get a credit application if you want, for future purchases.
A 33 lb box should be enough for about 198 doses at 6 doses per lb. (198 sacks of ArcusStonecoat). The cost per sq. ft. is about .03 cents when the ArcusStonecoat applied at a coverage rate of 15 sq. ft. per sack at 3/8” thickness.
ArcusPlaster:
The minimum quantity order for the 1/8” (3mm) is (1) 40 lb box, at $92.00, plus UPS shipping costs and sales tax if applicable. You can pay by credit card over the phone and get a credit application if you want, for future purchases.
A 40 lb. box should be enough for about 240 doses at 6 doses per lb. (240 sacks of ArcusPlaster). The cost per sq. ft. is about .02 cents when the ArcusPlaster is applied at a coverage rate of 22 sq. ft. per sack at 3/16” thickness.
Dosage: 4 to 6 ounces (by volume, NOT weight) per 50 lb sack of ArcusStonecoat or ArcusPlaster (Approximately a medium a handful).
If you wish to weigh out precise amounts then 75 grams per dose is the recommended equivalent. Sprinkle into the material as it is being mixed. NOTE: when using the fibers there will be a slightly higher water demand to get to a working consistency, so don’t worry – this is normal. Expect to use about another 6 to 8 ounces of water per mix to get to a working consistency.
Usage Method: Measure out the fibers in a plastic cup with a scale on the side, filling to between the 4 and 6 ounce lines. Sprinkle the fibers into the material while mixing. Do not place directly into the water initially, as they will not blend as effectively.
Any questions, please contact us.

